User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specifications
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
6 Operations p. 103
6.1 Commissioning p. 104
6.1.1 Apply Power to RU p. 104
LED Display p. 106
RF Confirmation p. 107
6.1.2 Complete RU Installation p. 107
6.1.3 Radio Commissioning p. 107
7 M aintenance and Trouble Clearing p. 109
7.1 RU Alarms p. 110
8 Removal p. 112
8.1 Cable Removal p. 113
8.1.1 Disconnect Power p. 113
8.1.2 Remove RF Cables p. 114
8.1.3 Remove AISG Cable p. 115
8.1.4 Remove Optical Cable p. 115
8.1.5 Remove SFP Module p. 116
8.2 Detach RU From Pole p. 117
8.3 Detach RU from Wall p. 121
8.4 Detach RU M ounting Adapter Plate p. 125
8.5 Remove L-Brackets and Eye Bolts p. 127
A References p. 129
B ZTP Overview p. 131
C Optical Connector Cleaning p. 132
C.1 Cleaner Recommendations p. 133
C.2 LC Connector End Surface Cleaning p. 135
C.3 End Surface Cleaning In LC Connector p. 137
D Glossary p. 138
Index
p. 141
4
Release 1.0 ยท Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only