User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specifications
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
3.3.4
Product Safety Specifications
Basic Specification UL62368-1 2nd edition
Outdoor Specification UL 50E (UL60950-22) CSA-C22.2
Product Safety
Approvals/
Certification
Electrical equipment is required to be approved by a Nationally Recognized Testing Laboratory
(NRTL). A test report issued by a NRTL shows compliance with UL 50E Ed.1 2007/ CAN/ CSA-C22.2
NO. 94.2-07 and required encapsulation class.
3.3.5
EMC
Conducted Emission
Pow er Port Unintentional radiation: CFR 47, Part 15B
Test mode: traffic mode
RET Port Conducted emissions 3GPP 38.113
Test mode: traffic mode
Radiated Emission
Unintentional
Radiation
CFR 47, Part 15B
Test mode: traffic mode
Test standard 3GPP 38.113
Radio frequency
radiation exposure
limits
CFR 47, Part 1.1310
Immunity
Immunity Performance
Test standard 3GPP 38.113
Performance Criteria A The EUT must continue to operate as intended during and after test.
No degradation of performance or loss of functions.
Performance Criteria B Temporary loss of function is allowed, provided the function is self-recoverable.
Radio must meet performance criteria before and after completion of test.
RU Hardware Feature
Environment Specifications
26
Release 1.0 ยท Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only