User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specifications
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
1
About this Guide
Intended Audience: This guide is intended for personnel responsible for installation and operations of this radio
unit.
This document describes the procedures for installing the Fujitsu Radio Unit (RU), a tri-band (n71, n29, and n26)
frequency division duplex, four-antenna transceiver radio and includes specifications for RF performance, carrier
configuration, and environmental, mechanical, and electrical design.
About this Guide
14
Release 1.0 ยท Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only