Installation Instructions
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specifications
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
8.4
Detach RU Mounting Adapter Plate
This procedure describes how to detach the mount ing adapt er plat e from the RU.
Prerequisite:
■ Loctit e LB 8012 or equivalent lubricant applied to all bolt s
Recommended Tools:
■ ½, 7/ 16, and 11/ 16 socket s
■ 5/ 8 wrench
■ Philips screw driver
■ Power tools (optional)
Step 1
Unscrew the two M 10 x 30 bolt s from the front of the mount ing adapt er plat e.
FNC001601_Rev_02
Figure 37
Removing Bolts from M ounting Adapter Plate
Removal
Detach RU Mounting Adapter Plate
125
Release 1.0 · Issue 1, M arch 2021
Fujitsu and Fujitsu Customer Use Only