User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specification
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
3.8.6 M aintenance Interface p. 39
3.9 TX Control Function p. 42
3.10 Performance Requirement p. 44
3.10.1 eCPRI p. 44
Line Bit Rate p. 44
Selecting Recovery Clock p. 44
Counter p. 45
Optical M odule p. 45
3.10.2 Radio Performance p. 45
General Specifications p. 46
Transmitter Specification p. 47
Receiver Specification p. 54
3.10.3 Power Supply p. 60
Electrical Specifications p. 60
DC Power Specification p. 60
3.11 M echanical Design and Other Options p. 62
3.11.1 RU External View p. 62
3.11.2 Bottom Layout p. 64
4 Ordering Information p. 65
4.1 Radio Unit p. 66
4.2 M ounting Kits p. 67
4.3 Accessories p. 68
5 Installation p. 69
5.1 Unpack p. 70
5.2 RU Inventory p. 71
5.3 M ounting p. 75
5.4 Installation Precautions p. 79
5.5 Returning of Defective Equipment p. 80
5.6 RU Installation p. 81
5.6.1 Installation Prerequisites p. 81
5.6.2 Attach L-Brackets and Eye Bolts p. 81
5.6.3 Attach RU Mounting Adapter Plate p. 83
5.6.4 Attach RU to Pole p. 85
5.6.5 Attach RU to Wall p. 91
5.7 Cable Installation p. 98
5.7.1 Connect SFP Module p. 98
5.7.2 Connect Optical Cable p. 98
5.7.3 Connect AISG Cables p. 99
5.7.4 Connect RF Cables p. 100
5.7.5 Check Connections and DC Power Polarity p. 101
6 Operations p. 102
3
Release 1.0 ยท Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only