User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specification
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
Table 5 (Cont.)
Specification In 3GPP 38.113
Phenomenon Application Reference Standard
Detail
Specification
Criteria
Electrostatic discharge Enclosure IEC 61000-4-2 Electric Discharge B
Fast transients common mode Signal, telecommunications and
control ports, DC power input
ports
IEC 61000-4-4 Fast Transients
Common Mode
B
RF common mode 0,15…80 MHz Signal, telecommunications and
control ports, DC power input
ports
IEC 61000-4-6 RF Common Mode A
Surges, common and differential
mode
AC power input ports,
telecommunications port
IEC 61000-4-5 Resistability of
Lightning
B
Radiated Immunity
Test Standard 3GPP 38.113
IEC 61000-4-3 Level 3
Test mode Traffic mode, no test in RX exclusion band
80…6000 M Hz 3 V/ m, AM 80%
Performance Criteria A
Electric Discharge
Test standard 3GPP 38.113
IEC 61000-4-2
Contact discharge ±4 kV
Air discharge ±8 kV
Performance Criteria B
Fast Transients Common Mode
Test standard 3GPP 38.113
IEC 61000-4-4
0.5 kV
Performance criteria B
Injected port Power port, RET Port
RU Hardware Feature
Environment Specification
26
Release 1.0 · Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only