User's Guide
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specification
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
3.3.5
EMC
Conducted Emission
Pow er Port Unintentional radiation: CFR 47, Part 15B
Test mode: traffic mode
RET Port Conducted emissions 3GPP 38.113
Test mode: traffic mode
Radiated Emission
Unintentional radiation CFR 47, Part 15B
Test Standards 3GPP 38.113
Radio frequency radiation
exposure limits
CFR 47, Part 1.1310
Immunity
Immunity Performance
Test standard 3GPP 38.113
Performance Criteria A The Equipment Under Test (EUT) must continue to operate as intended during
and after test.
No degradation of performance or loss of functions.
Performance Criteria B Temporary loss of function is allowed, provided the function is self-recoverable.
Radio must meet performance criteria before and after completion of test.
Immunity Specification
Test standard 3GPP 38.113
Table 5
Specification In 3GPP 38.113
Phenomenon Application Reference Standard
Detail
Specification
Criteria
RF electromagnetic field (80…
6000 M Hz)
Enclosure IEC 61000-4-3 Radiated Immunity A
RU Hardware Feature
Environment Specification
25
Release 1.0 · Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only