User's Guide

3.2
RU Specifications
Table 1
RU General Specifications
Item Specification
Frequency band Band 70
UL: 1695…1710 M Hz
DL: 1995…2020 M Hz
(DL/ UL Gap=285 M Hz)
Band 66
UL: 1710…1780 M Hz
DL: 2110…2200 M Hz
(DL/ UL Gap=330 M Hz)
Antenna configuration 4T4R, 4 x 40 W 4T4R, 4 x 60 W
Total power: 320 W
Refer to Antenna Configuration.
Carrier configuration LTE: 5, 10, 15, 20, 25 M Hz BW LTE: 5, 10, 15, 20 M Hz BW
Up to 2 carriers
Refer to Carrier Configuration.
Up to 3 carriers
Refer to Carrier Configuration.
Operating temperature −40…+55 ℃, with 1.0 m/ s ambient wind speed (without sun shield or sun shade)
1 , 2 , 3
Volume < 30L (The volume calculation does not include connectors, protrusions, or manufacturing tolerances.)
Dimension (W x H X D) 400 x 380 x 200 mm
Weight < 29.0 kg max (except the mounting brackets, other options)
Power consumption < 1300 W (under all operational condition, with AISG)
Interface ▪ Optical interface x1 for ORAN (10G SFP)
• SFPs are changeable in the field.
• No cascade support.
▪ Four ANT ports (4.3-10 RF connectors)
▪ RET (AISG 8-pin circular connector conforming to IEC 60130-9 - Ed. 3.0 with screw-ring locking.)
▪ LED (For indication of RU status, green: normal condition, red: failure. The eCPRI condition indicator)
▪ Debug/ Test port (RJ45 supports 100Base-T or 1GE. Only for manufacturing use.
▪ Power connector (Amphe-BTS connector series or compatible connector is used. 2 wire (–48 V DC, Return))
▪ FG (Two M 6 bolts)
Optical bit rate 10.3125 Gb/ s
Antenna Connector Type 4.3-10 RF Connector
Antenna Control
Interface
AISG
RU Hardware Feature
RU Specifications
20
Release 1.0 · Issue 1, March 2021
Fujitsu and Fujitsu Customer Use Only