Installation Instructions
Table Of Contents
- User Guide
- Contents
- Preface
- 1 About this Guide
- 2 Overview
- 3 RU Hardware Feature
- 3.1 System Configuration
- 3.2 RU Specifications
- 3.3 Environment Specification
- 3.4 RU Downlink/Uplink Default Parameters
- 3.5 Antenna Configuration
- 3.6 Carrier Configuration
- 3.7 Block Diagram
- 3.8 External Interface
- 3.9 TX Control Function
- 3.10 Performance Requirement
- 3.11 Mechanical Design and Other Options
- 4 Ordering Information
- 5 Installation
- 6 Operations
- 7 Maintenance and Trouble Clearing
- 8 Removal
- A References
- B ZTP Overview
- C Optical Connector Cleaning
- D Glossary
- Index
8
Removal
In this chapt er:
8.1 Cable Removal
8.2 Detach RU From Pole
8.3 Detach RU from Wall
8.4 Detach RU M ounting Adapt er Plat e
8.5 Remove L-Brackets and Eye Bolt s
The following sect ions describe how to det ach a RU from a wall or pole mount and how to remove the pow er
cables.
Caution: Use care when handling the RU, as it is heavy. Fujit su recommends removing the RU on a two-
person team to avoid damage to the unit or injury to the user.
Caution: If the RU is being removed from a high location, Fujit su recommends using lifting equipment to
hoist the RU by a pair of eye bolts mount ed on the RU.
Removal
111
Release 1.0 ยท Issue 1, M arch 2021
Fujitsu and Fujitsu Customer Use Only