User's Manual

12
Contents/Precautions
Notes about the adapters (including
charger and conversion adapter for
charging) and desktop holder
●
Charge the battery pack at ambient
temperatures between 5

C and 35

C.
●
Do not charge battery pack in the
following locations.
・
Areas with high humidity or dust, or in
areas exposed to strong vibrations
・
Close to landline phones, TVs, radios,
etc.
●
The adapters (including charger and
conversion adapter for charging) may
become warm during charging but
this is not a malfunction.
●
Do not use a DC adapter to charge the
battery pack when the car engine is
not running.
May cause the car battery to run down.
●
When using an outlet with a fall-off
prevention mechanism, follow the
instructions in the user's manual of the
outlet.
●
Do not subject the adapters and
desktop holder to strong impacts. Also,
do not deform the charger terminal or
external connector terminal.
May cause a malfunction.
Notes about the docomo UIM card
●
Do not apply unnecessary force when
inserting/removing the docomo UIM
card.
●
Do not insert the docomo UIM card
into another IC card reader/writer.
Please note that you are liable for any
damage as a result of such action.
●
Always keep the IC area clean.
●
Clean the docomo UIM card with a
soft dry cloth (such as the type used
for eyeglasses).
●
Keep a separate memo and note
information stored in the docomo UIM
card.
DOCOMO shall not be liable for any loss
of content.
●
To protect the environment, please
take any unnecessary docomo UIM
cards to a docomo Shop or retailer.
●
Do not damage, touch haphazardly or
short-circuit the IC.
May cause data loss or malfunction.
●
Do not drop or otherwise subject the
docomo UIM card to severe impact.
May cause a malfunction.
●
Do not bend the docomo UIM card or
place heavy objects on it.
May cause a malfunction.
●
Do not insert the docomo UIM card to
the FOMA terminal with a label or
sticker attached on the card.
May cause a malfunction.
Notes on using the Bluetooth
funct
ion
●
The FOMA terminal supports security
features compliant with the Bluetooth
standards, but the security may not
be sufficient depending on the
configuration.
Take care of the security when making
data communication using the
Bluetooth function.
●
Please be aware that DOCOMO shall
not be responsible for any data leak
which may occur when making data
communication using the Bluetooth
function.
●
Frequency band
The frequency band used by the
FOMA terminal's Bluetooth/wireless
LAN function is indicated on the
battery pack compartment. The
following are the descriptions:
2.4: This radio equipment uses the
2400 MHz band.
FH/DS/OF: Modulation scheme is the
FH-SS, DS-SS or OFDM
system.
1: The estimated interference distance
is 10 m or less.
4: The estimated interference distance
is 40 m or less.
■■■
：
The full band between
2400 MHz and 2483.5 MHz
is used and the band of the
mobile identification
device can be avoided.
Available channels vary depending on
the country.
For use in an aircraft, contact the
airline beforehand.
13
Contents/Precautions
●
Cautions on using Bluetooth devices
The operating frequency band of this
product is used by industrial,
scientific, medical equipment and
home electrical appliances such as
microwave ovens, as well as by
private radio stations for identifying
mobile units in the manufacturing
lines of plants (radio stations
requiring a license), specified low-
power radio stations (radio stations
requiring no license), and amateur
radio stations (hereinafter referred to
as "another station").
1.
Before using this product, confirm
that "another station" is not being
operated nearby.
2. In the event of this product causing
harmful radio wave interference
with "another station", promptly
change the usage place or stop
radio wave emission by turning off
the power, etc.
3. If you have further questions,
contact
"docomo Information
Center" on the last page of this
manual.
Notes about wireless LAN (WLAN)
●
Wireless LAN
Do not use wireless LAN near
magnetic devices such as electrical
appliances or AV/OA devices, or in
radio waves.
･
Magnetism or radio waves may
increase noises or disable
communications (especially when
using a microwave oven).
･
When used near a TV, radio, etc.,
reception interference may occur, or
TV screen image may become fuzzy.
･
If there are multiple wireless LAN
access points nearby and the same
channel is used, search may not
work correctly.
●
Cautions on using 2.4 GHz devices
The operating frequency band of
WLAN devices is used by industrial,
scientific, medical equipment and
home electrical appliances such as
microwave ovens, as well as by private
radio stations for identifying mobile
units in the manufacturing lines of
plants (radio stations requiring a
license), specified low-power radio
stations (radio stations requiring no
license), and amateur radio stations
(radio stations requiring a license).
1.
Before using this device, confirm
that private radio stations for
identifying mobile units, specified
low-power radio stations and
amateur radio stations are not
being operated nearby.
2.
If this device causes harmful radio
interference to a private radio
station for identifying mobile units,
immediately change the frequency
band or stop using the device, and
contact "docomo Information
Center" on the last page of this
manual for crosstalk avoidance,
etc. (e.g. partition setup).
3. If this device causes radio
interference to a specified low-
power radio station or amateur
radio station, contact "docomo
Information Center" on the last
page of this manual.
Notes on FeliCa
●
The T-01C does not support FeliCa
transmission functions.
For this reason, some functions will be
unavailable for exchanging, sending or
receiving data between mobile phones.
●
When an unavailable function has been
used, the message "This is non-Osaifu-
Keitai-compliant application." is
displayed.
Caution
●
Never use the FOMA terminal that is
modified. Using a modified device
violates the Radio Law.
The FOMA terminal has acquired the
certification of conformity with technical
regulations for the specified radio station
based on the Radio Law, and the
"Technical Conformity Mark
" is printed
on the nameplate of the FOMA terminal
as a certificate.
If the screws of FOMA terminal are
removed and a modification is given to
the inside, the certification of conformity
with technical regulations will become
invalid.
Never use the FOMA terminal without the
valid certification. Doing so violates the
Radio Law.