User's Manual

8
Contents/Precautions
Caution
If the battery fluid leaks, do not get
the liquid on your skin (face, hands,
etc.).
May result in loss of eyesight and harm
to your skin.
If the liquid comes into contact with your
eyes, mouth, skin or clothes,
immediately rinse them with clean water.
If the liquid gets into your eyes or mouth,
immediately see a doctor after rinsing
your eyes or mouth.
4. Handling the adapters (including
charger and conversion adapter
for charging) and desktop holder
Warning
Do not use the adapters (including
charger and conversion adapter for
charging) if the cord is damaged.
May cause fires, burns or electric shock.
Never use the AC adapter or desktop
holder in humid locations such as a
bathroom.
May cause fires, burns or electric shock.
The DC adapter should only be used
in negative grounded vehicles. Never
use this adapter in positive grounded
vehicles.
May cause fires, burns or electric shock.
Do not touch adapters (including
charger and conversion adapter for
charging) if you hear thunder.
May cause electric shock.
Warning
Take care not to short-circuit the
charger terminal when connected to
an outlet or cigarette lighter socket.
Also, take care not to allow any part
of your body (hands, fingers, etc.) to
come into contact with the charger
terminal.
May cause fires, burns or electric shock.
Do not place heavy objects on the
cord of adapters (including charger
and conversion adapter for charging).
May cause fires, burns or electric shock
When plugging/unplugging the AC
adapter into/from the outlet, do not
allow metal straps or other metal
objects to come into contact with the
terminal.
May cause fires, burns or electric shock.
Do not handle the cord and plug of
adapters (including charger and
conversion adapter for charging) with
wet hands.
May cause fires, burns or electric shock.
Always use the specified power
supply and voltage.
When using overseas, use an AC
adapter that can be used overseas.
Using the incorrect voltage may cause
fire, burns or electric shock.
AC adapter: 100V AC
DC adapter: 12/24V DC (for negative
grounded vehicles only)
AC adapter usable overseas: 100 to
240V AC (Connect only with household
AC outlet)
Warning
If the fuse in the DC adapter blows,
always replace it with a fuse of the
specified type.
May cause fires, burns or electric shock.
Refer to the relevant manual for
information on the correct fuse
specifications.
Wipe off any dust on the power plug.
May cause fires, burns or electric shock.
Fully plug the AC adapter into the
outlet.
May cause fires, burns or electric shock.
Always grasp the power plug when
unplugging the adapters from the
outlet or cigarette lighter socket. Do
not forcibly pull by the cord of
adapters (including charger and
conversion adapter for charging).
May cause fires, burns or electric shock.
Unplug the power cord from the
outlet or cigarette lighter socket when
not using the adapters for a long
time.
May cause fires, burns or electric shock.
Should water or other liquids enter
the adapters, remove the power plug
from the outlet or cigarette lighter
socket immediately.
May cause fires, burns or electric shock.
Always unplug the power plug from
the outlet or cigarette lighter socket
before cleaning the adapters.
May cause fires, burns or electric shock.
9
Contents/Precautions
Continued on next page
5. Handling the docomo UIM card
Caution
Be careful with the cutting surface
when detaching the docomo UIM card.
May cause bodily injury.
6. Handling the FOMA terminal
near electronic medical
equipment
■
The precautions detailed here conform
to the guidelines drawn up by the
Electromagnetic Compatibility
Conference Japan, regarding the
protection of electronic medical
equipment from signals emitted by
mobile phones.
Warning
Observe the following in hospitals or
other medical facilities.
・
Do not take the FOMA terminal into
operating rooms, ICUs (Intensive Care
Units) or CCUs (Coronary Care Units).
・
Turn off the FOMA terminal inside
hospital wards.
・
Turn off the FOMA terminal even in an
area outside hospital wards, such as a
hospital lobby, when electronic
medical equipment is in use nearby.
・
Where a medical facility has specific
instructions prohibiting carrying and
use of mobile phones, observe those
instructions strictly.
Warning
Turn off the FOMA terminal in
crowded places such as rush-hour
trains in case somebody nearby has
an implanted cardiac pacemaker or
implanted cardioverter-defibrillator.
Electromagnetic signals may have
harmful effects on the operation of
implanted cardiac pacemakers and
implanted cardioverter-defibrillators.
If you have an implanted cardiac
pacemaker or implanted cardioverter-
defibrillator, always carry or use the
FOMA terminal at least 22 cm away
from your implant.
Electromagnetic signals may have
harmful effects on the operation of
implanted cardiac pacemakers and
implanted cardioverter-defibrillators.
Patients receiving medical treatment
away from a hospital or medical
facility (e.g. home treatment) who are
using electronic medical equipment
other than implanted cardiac
pacemakers or implanted
cardioverter-defibrillators should
consult the respective manufacturers
for information regarding the effects
of signals on the equipment.
Electromagnetic signals may have
harmful effects on the operation
of
electronic medical equipment.
Material list
Part
Materilal/Surface
treatment
Certifiaction
nameplate
Polyester film
Display Tempered glass/
Shatterproof film
Front panel PC resin/Urethane coating
Rear panel PC resin/Non-continuous
deposit + UV cured coating
Back
cover
Cover
body
PC resin/Urethane coating
Camera
periphery
PC resin/Non-continuous
deposit + UV cured coating
Camera,
external
connector
terminal
periphery
PC resin/UV cured coating
Inner sheet Magnetic sheet/Polyester
film
Back key/Home key/
Menu key
PC resin/Non-continuous
deposit + UV cured
coating
External connector
terminal cover
PC resin + Polyester
elastomer resin/Non-
continuous deposit + UV
cured acrylic coating
Camera panel Acrylic resin/UV cured
acrylic coating
Camera light panel Acrylic resin
Infrared port panel PC resin/Deposit + UV
cured acrylic coating
1Seg antenna
Stainless steel
＋
ABS resin/
UV cured acrylic coating
Strap hole Stainless steel/Nickel coating
+ Tin nickel coating