User's Manual

68
Settings
Disabling the PIN lock
1
If the PIN1/PIN2 code is locked, tap "Emergency
call"
2
Enter "**05* [PUK] * [new PIN1/PIN2 code] * [new
PIN1 code/PIN2 code] #"
●
For example, to change the PIN1 code to "7777" when the PUK is
88888888, enter "**05*88888888*7777*7777#".
Setting the screen lock
You can lock your FOMA terminal with a specific screen unlock pattern
(or unlock method) or security code to prevent it from being used by
other people.
Creating an unlock method
You can set so that a pattern must be entered to unlock the screen.
1
→
"Settings"
→
"Location & security"
→
"Set unlock
method"
2
Tap "Pattern"
3
Read the explanation in the screen, and tap "Next"
4
When you have determined the pattern, tap "Next"
5
Slide your finger to at least four points vertically,
horizontally or diagonally to draw a pattern. When
you have drawn the pattern, release your finger
6
Tap "Continue"
7
Draw the pattern again, and tap "Confirm"
Note
●
To disable display of the pattern when unlocking the screen,
→
"Settings"
→
"Location & security"
→
deselect the "Use visible
pattern" checkbox.
●
To enable vibration when entering the pattern,
→
"Settings"
→
"Location & security"
→
select the "Use tactile feedback"
checkbox.
●
To change the screen unlock pattern,
→
"Settings"
→
"Location &
security"
→
"Change unlock pattern".
●
If you forget your screen unlock pattern, log in by your Google
account, and follow the on-screen instructions to make a new
pattern.
Setting the screen lock security code
You can set so that a security code must be entered to unlock the
screen.
1
→
"Settings"
→
"Location & security"
→
"Set unlock
method"
2
Tap "Security code"
3
Enter the 4- to 8-digit security code, and tap
"Continue"
4
Enter the security code again, and tap "Confirm"
Note
●
To change the screen unlock security code,
→
"Settings"
→
"Location & security"
→
"Change security code".
●
If you forget your screen unlock security code, log in by your
Google account, and follow the on-screen instructions to make a
new pattern.
Manually locking the screen
1
Press
C
69
Settings
Unlocking the screen
1
Press
C
or
A
The key unlock screen is displayed.
2
Slide "Unlock" upwards to unlock the screen
The pattern entry screen or the security code entry screen is
displayed.
3
Enter the screen unlock pattern or the screen
unlock security code, and tap "OK"
Managing authentication information
You can install authentication information for accessing security-
protected Wi-Fi networks or VPNs or other certificates from the microSD
card.
You can also set a password to certification information storage
for saving authentication information and certificates.
Setting a password to certification information
storage
1
→
"Settings"
→
"Location & security"
→
"Set
password"
2
Enter the password
3
Enter the password again, and tap "OK"
Enabling authentication information and certificates
You can enable authentication information and certificates by allowing
applications on your FOMA terminal to access authentication
information storage set with a password.
●
Set a password to certification information storage in advance.
1
→
"Settings"
→
"Location & security"
2
Select the "Use secure credentials" checkbox
3
Enter the password for the authentication
information storage, and tap "OK"
Clearing authentication information storage
You can clear all authentication information or certificates from the
authentication information storage to reset the storage password.
1
→
"Settings"
→
"Location & security"
→
"Clear
storage"
2
Tap "OK"
Installing authentication information or certificates
from the microSD card
1
→
"Settings"
→
"Location & security"
→
"Install
from SD card"
2
Tap the authentication information/certificate you
want to install
3
If necessary, enter the password, and tap "OK"
4
Enter the name of the authentication information/
certificate, and tap "OK"
●
If a password is not set to the authentication information storage,
follow the on-screen instructions to set the password.