User's Manual

USING SETUP MODE
5-44 User's Manual
Table 5.7 CONFIG Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
CONFIG
Items
Options Description
GATHER
Setting of ribbon protective control at
a line feed on continuous forms
ENABLE The protective control is executed.
DISABLE
The protective control is not
executed.
CUT-CTL
Setting of retracting control at
canceling TEAR OFF of continuous
forms.
PRCISIN
The precision-prioritized retracting
control is executed.
It retracts a certain amount of paper
(the top part of the paper which hangs
out from the TOFS), and then moves
back to the position before TEAR
OFF. If TOFS detects paper end
when a certain amount of paper is
retracted, it executes the continuous
forms save operation and then
executes the paper loading operation.
SPEED
The speed-prioritized retracting
control is executed.
It retracts the paper by the amount the
paper was advanced.