User's Manual

PRINTER AND PAPER SPECIFICATIONS
B-2 User's Manual
Print method
Impact dot matrix with a 0.2 mm, 24-wire head
Print direction
Bidirectional logic-seeking or unidirectional
seeking
Character cell
Horizontal × vertical
Letter (10 cpi):
36 × 24 dots
Letter (12 cpi):
30 × 24 dots
Report:
18 × 24 dots
Draft:
9 × 24 dots
(MODE 1)
12 × 24 dots
(MODE 2)
High-speed draft:
9 × 24 dots
Paper handling
Standard: Common push tractor on front.
(Moving tractor unit to rear is possible)
Paper loading by LOAD button Advancing
perforations to tear-off edge by TEAR OFF
button
Parking continuous forms is available.
Optional: Paper Table for friction-feed (cut sheets).
Cut sheet feeder(for front or rear)
Tractor unit (for 2
nd
tractor)
Paper type
1 to 5-copies for cut sheet feeder
1 to 9-copies for tractor and paper table
Paper size
Continuous Width: 102-420 mm (4-16.5 in)
Length: 102 mm (4 in) or greater
Cut sheets
(Paper table)
Width: 55-420 mm (2.16-16.5 in)
Length: 70-420 mm (2.76-16.5 in)
(Cut sheet feeder)
Width: 100-420 mm (4-16.5 in)
Length: 70-420 mm for front cut sheet feeder
(2.76-16.5 in)
100-420 mm for front cut sheet feeder
(4-16.5 in)
Note:
To use cut sheets, the optional paper table is required. More over, to
use cut sheets exceeding 297 mm in length, the optional large paper
table and large stacker are required. For detail see Chapter 3.
FUNCTIONAL
SPECIFICATIONS