User's Manual

Page 5

4. SET-UP for Bluetooth SPP connection

Connect CN2 connector on MBH-SAKURA2 and the USB port on PC with USB cable to control

Bluetooth SPP module (Figure 4-1).

To work with the USB serial port (UART over USB), first download the FTDI FT232R driver (D2XX and

VCP) from:

http://www.ftdichip.com/Drivers/VCP.htm

Install the driver according to the installation guide available on the FTDI web site.

After the driver is installed, go to

My Computer->Properties->Hardware->Device Manager->Ports to identify

the

COM port to which the USB serial port is assigned.

-The baud rate is set to 115.2kbps (Default setting)

Figure 4-1: Hardware Setup

USB port

CN2