User's Manual

2 Preparation to Print
20
AC adapter
AC cable
AC adapter
Jack
Jack
Cover
<Side
view
＞
(1)
(2)
2.5 Connecting AC Adapter (Charging)
The battery is charged by the printer's built-in charger.
1. Please connect the AC cable with
the AC adapter, and connect the
AC plug to an outlet.
2. Please hook up the jack cover to
open.
Insert DC output terminal of AC
adapter into the AC adapter jack.
3. When the charge starts, the LED turns red, and when the
battery is fully charged, the LED turns off. Please refer to
chapter 4.3 for the LED display of charging status.
4. Please hang the hook of the jack
cover to the hole of AC jack, and
push center of the jack cover to
close.
Important
When the printer power supply is turned on, it is not able to
charge.
Caution
Please stop charging immediately if an abnormal charge is generated.