User's Manual

6 Troubleshooting
41
■ Others
Problem Cause Solution
Print starting
location is
incorrect
Does the mark detection
operate correctly?
(C. 4.2)
Please remove the
reason for the mark
detection error.
(C. 3.5)
Is the battery charge
low?
Please charge
the battery. (C. 2.5)
Is the battery old? Please exchange it for a
new battery.
Is too much black
printed?
It is not a breakdown
though the print slows
when there is too much
black printed.
Printing is slow
Isn't the ambient
temperature low?
It is not a breakdown
though the print slows
when the ambient
temperature is low.
Paper cover
does not open or
lose c
Does the paper cover
come off?
Please set the paper
cover.
Important
- Please contact technical support when problems cannot be solved
by these suggestions.
- In parentheses (C. **) in the table indicates the corresponding
chapter number.