User Manual

41
EN
Problems Possible Causes Solutions
The picture is out of
focus.
1 The shooting distance is not
appropriate.
2 The lens is not clean.
3 Your camera was shaken when taking
the picture.
1 Select the shooting mode according to the
distance.
2 Clean the lens.
3 Hold your camera firmly and press in the
shutter release button gently. Since the slow
shutter is selected when shooting indoors or
dark outdoors, stabilizing the camera using a
table, tripod, etc. is recommended.
The picture is blurred.
1 Picture was not permitted to develop
without touching, pressure being
applied or other interference once it
ejected from the camera.
2 The picture did not come out smoothly.
1 Do not press onto or fold the picture.
2 Do not block the film exit with your finger.
The subject in the
viewfinder has shifted
in finished print.
● The shooting distance is too close to
the subject.
● See notes on using Macro Mode.
The part seen from
the viewfinder is
not included in the
picture.
● You looked into the viewfinder
obliquely when taking the picture.
● Look into the viewfinder from the front when
taking a picture.