Instruction Manual

20. FOOT ROLLING
Foot Rolling Function Start/Stop Control Button
Press this button once to activate rhythmic rolling massage at soles, press this button again to stop rolling
massage at soles.
Note: During Auto Program mode, pressing this button can also disable/enable the Foot Rolling function.
22/23. UPWARD/DOWNWORD ADJUSTMENT
When the spot and partial massage function are activated, this button can be used to move the massage rollers.
Hold this button to move the massage rollers upward/downward respectively. Release the buttons when reaching
desired position.
24. FULL AIR
Press this button to activate the air massage function for full body (CALF&FOOT/ARM/SHOULDER).
Press this button again to stop the function.
25. PARTIAL AIR
Press this button to activate body air pressure massage from shoulder to soles. Every time this button is
pressed, partial air massage function will change in the sequence of CALF&FOOT
ARM SHOULDER STOP .
26. INTENSITY
The Intensity Adjustment Button for Air Pressure Massage - 5 levels of intensity to be adjusted
When air massage function is engaged, every single press on this button will change the air intensity in the
sequence of “Lv1 > Lv2 > Lv3 > Lv4 > Lv5” in cycle.
21. SPOT/PARTIAL
The Spot or Partial Back Massage
Press this button once to activate localized Spot Massage while the original massage mode continues to run
at the latest position. Every single press on this button will change the massage function in the sequence of
“SPOT > PARTIAL > STOP” in cycle.
Note: Partial Massage will take the latest position as the center to perform Partial Massage with the distance
approx. 8 cm. SPOT/PARTIAL button is only effective under manual massage mode.
8