Instruction Manual

6
5/6. LEGREST RECLINE AND RESTORE
Angle Adjustment Button for Leg Rest
Keep pressing either button until the leg rest reaches your desired position.
1. ON/OFF
The Start/Stop Control Button
Press this button to light up the LCD screen. Press any massage function button to start massage. This
will initiate the timer function. Press this button again to stop all massage functions, massage chair
will return to its original position.
2. PAUSE
Press this button once to halt current massage function and countdown timer. During the pause mode,
the pause button will be blinking.
Press this button again to cease the “Pause” function and resume previous massage functions, as well
as countdown timer.
3. HEAT
Lumbar Heat Function Start/Stop Control Button
Press this button to activate lumbar heat function, press this button again to stop the heat function.
Note: During Auto Program mode, pressing this button can also disable/enable the heat function.
4. TIMER
Time Interval Control Button
When a massage function is activated, the timer is preset at 15 minutes. Every single press of this
button will change the timer interval in the sequence of “20>25>30>5>10>15>20”minutes in circle.
7/8. CHAIR RECLINE AND RESTORE
Angle Adjustment Button for Leg Rest
Keep pressing to comfortably lay flat or to restore the chair to its original position.
9. ZGR
Press this button in order to active the ZGR function.
10. Speed+
The Speed+ Adjustment Button Works for Kneading, Tapping, Kneading-tapping, Clapping,
and Swedish Function
Every single press on this button will change the massage speed interval in the sequence of
“Lv1 > Lv2 > Lv3 >Lv4 >Lv5”.