Installation instructions Fujian Nexhome Intelligent Technology Co.,Ltd.
Smart Home Gateway NR500+ About this product: NR500 + is a ZigBee smart home gateway, including one INTERNET port and one LOCAL ports. The gateway adopts ZigBee 3.0 protocol to control ZigBee wireless smart home devices. The gateway supports app management, automatic adjustment of wireless power and automatic avoidance of wireless interference.
Product diagram: 150.2mm 170.2mm Front view 34.
Technical data： Operating voltage DC 12V Operating temperature -5℃～50℃ Interface Operating humidity Dimensions 1 INTERNET port, 1 LOCAL port ≤90％RH 170.2mm×150.2mm×34.3mm INTERNET port is connected with internet line, LOCAL port is used for ordinary equipment. When the nexhome app adds the gateway, click the wireless switch to turn on the wireless signal, long press 5S to turn off the wireless signal. Press ZigBee switch 5S to allow the device to access the network. Management: http://002396.
RESET LAN2 Router LAN1 LAN3 LAN4 The installation： PROWER LAN口 Hardware connection: Power Supply Optical fiber LOCAL INTERNET POWER Smart Home Gateway（NR500+） NET ZIGBEE TCP/IP Power adapter
Precautions Please keep away from strong magnetic field, high temperature, humidity and other environments during installation, and power off operation. Do not drop the device or hit it strongly. Company Company: Fujian Nexhome Intelligent Technology Co.,Ltd. ADD: 7th floor, building 1, No. 9, Gaoxin Avenue, Shangjie Town, Minhou County, Fuzhou City. TEL: +86-591-28053888 WEB: http://www.nexhome.
FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
