User's Manual

2
Please do NOT put the terminal in places that have too much damp or dust, nor leave the terminal in direct sunlight for a
long time.
Application Occasions
Since some electromagnetic wave may be radiated from wireless module of the terminal, the terminal is forbidden to be
used in some certain occasions like airplane and gas station. Neither charging nor communication is allowed in hazardous
sites.
 The terminal should not be thrown, fallen down or hit; otherwise, the screen might be broken, program might be interrupted
and data might be lost.
 Please do NOT use sharp-pointed item to touch keypad; otherwise the keys might be damaged or short circuit might
occur.
 Please use a soft and dry cloth to wipe the terminal, and do not use a damp cloth, benzene, thinner or other volatile
chemicals to avoid the terminal keyboard and shell variant of aging.
 Do not put the terminal face down in order to avoid the keyboard disoperation.
 The battery should not be taken out when the terminal is still powered on, otherwise data in memory might be lost.
 Condensation on the housing, which might caused by sharp change in temperature, will affect the terminal`s normal work.
Therefore, please do NOT operate the terminal until it gets dry.
Specifications
Performance
Processor ARM9 400MHz CPU
Operation System Linux compliance operation system
Memory
32MB SDRAM
128MB FLASH (80MB for user area)
Interface
RS-232, USB 1.1, support USB charge
Physical
Dimensions (L x W x H) 168.5 x 65 x 39.5 mm / 6.6 x 2.5 x 1.5 inch
Weight
270g (Including battery)
Display 8 level gray monochrome screen, 160 x 160 resolutions
Keyboard 26 Keys Numeric with auto backlight
Notification Vibrator, Speaker and LED
Battery
Main
3.7V, 2300mAh, Rechargeable Li-Polymer battery
Backup
3.7V, 150mAh, Rechargeable Li-Polymer battery
Power Adaptor Output: DC 5V/1.5 A; Input: AC 100~240V, 50~60Hz 0.4A
Environmental
Operation Temperature -20°C ~ 45°C
Storage Temperature
-20°C ~ 60°C
Humidity 5% ~ 95% (Non-condensing)