User's Manual

22
Chapter 4 Using WiFi Communication
A. Main Window
TheMainwindowprovidesanoverviewofthecurrentwirelessnetworkconnectionconfiguration(ActiveProfile)
Thefollowingimage(inFigure5.1)istheSCUMainwindowsforWindowsCE.
Figure5.1:SCUMainWindow
EnableRadio/DisableRadio
When the radio is enabled, select this button (which displays Disable Radio) to disable it. When the radio is disabled,select the
samebutton(whichnowdisplaysEnableRadio)toenableit.Whendisabled,theradiodoesnotattempttomakeaconnectiontoan
accesspoint.
Active
Profile
Todisplaysthenameoftheactiveprofile.Usethedrop‐downmenutoselectadifferentprofile.
Note: If ThirdPartyConfig is selected (and after the device goes through a power cycle), WZC (Windows Zero Configuration) or
anotherapplicationisusedtoconfiguretheSSID,AuthType,EAPType,
andEncryptionsettings.
Status
ToindicatesthecurrentstatusoftheSummitradio.Connectionstatusesinclude:
 Down ‐ The radio is not recognized by Summit software and therefore is not associated and nor
authenticated.
 Disabled ‐ Theradioisdisabled.Toenabletheradio,tapEnableRadiolocatedontheSCU
Mainwindow.When
theradioisdisabled,itdoesnotattempttomakeaconnectiontoanaccesspoint.
 NotAssoci ated‐Theradiohasnotestablishedaconnectiontoanaccesspoint.
 Associated ‐ Theradiohasestablishedaconnectiontoanaccesspoint.