User's Manual

21
Chapter 4 Using WiFi Communication
Note: WiFi communication is an optional feature.
A. Main Window
TheMainwindowprovidesanoverviewofthecurrentwirelessnetworkconnectionconfiguration(ActiveProfile)
Thefollowingimage(inFigure5.1)istheSCUMainwindowsforWindowsCE.
Figure5.1:SCUMainWindow
EnableRadio/DisableRadio
When the radio is enabled, select this button (which displays Disable Radio) to disable it. When the radio is
disabled,selectthesamebutton(whichnowdisplaysEnableRadio)toenableit.Whendisabled,theradiodoes
notattempttomakeaconnectiontoanaccesspoint.
Active
Profile
Todisplaysthenameoftheactiveprofile.Usethedrop‐downmenutoselectadifferentprofile.
Note: If ThirdPartyConfig is selected (and after the device goes through a power cycle), WZC (Windows Zero
Configuration)oranotherapplicationis used to configurethe SSID, Auth Type, EAPType,
andEncryption
settings.
Status
ToindicatesthecurrentstatusoftheSummitradio.Connectionstatusesinclude:
 Do wn ‐ The radio is not recognized by Summit software and therefore is not associated and
norauthenticated.