User Manual

【Enter Setup】
87 **【Exit Setup】
Check Digit Verification
Check digits are optional for Code 93 and can be added as the last two digits, which are calculated values
used to verify the integrity of the data.
Disable: The scanner transmits Code 93 barcodes as is.
Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Code 93
barcodes to verify that the data complies with the check digit algorithm. Barcodes passing the checks will
be transmitted except the last two digits, whereas those failing them will not be transmitted.
Transmit Check Digit After Verification: The scanner checks the integrity of all Code 93 barcodes to
verify that the data complies with the check digit algorithm. Barcodes passing the checks will be
transmitted, whereas those failing them will not be transmitted.
【Disable】
**【Do Not Transmit Check Digit After Verification】
【Transmit Check Digit After Verification】
If the Do Not Transmit Check Digit After Verification option is enabled, Code 93
barcodes with a length that is less than the configured minimum length after having
the two check digits excluded will not be decoded. (For example, when the Do Not
Transmit Check Digit After Verification option is enabled and the minimum length is
set to 4, Code 93 barcodes with a total length of 4 characters including the two check
digits cannot be read.)