User Manual

【Enter Setup】
83 **【Exit Setup】
Check Digit Verification
A check digit is optional for Codabar and can be added as the last digit. It is a calculated value used to
verify the integrity of the data.
Disable: The scanner transmits Codabar barcodes as is.
Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Codabar
barcodes to verify that the data complies with the check digit algorithm. Barcodes passing the check will
be transmitted except the last digit, whereas those failing it will not be transmitted.
Transmit Check Digit After Verification: The scanner checks the integrity of all Codabar barcodes to
verify that the data complies with the check digit algorithm. Barcodes passing the check will be
transmitted, whereas those failing it will not be transmitted.
**【Disable】
【Do Not Transmit Check Digit After Verification】
【Transmit Check Digit After Verification】
If the Do Not Transmit Check Digit After Verification option is enabled, Codabar
barcodes with a length that is less than the configured minimum length after having
the check digit excluded will not be decoded. (For example, when the Do Not
Transmit Check Digit After Verification option is enabled and the minimum length is
set to 4, Codabar barcodes with a total length of 4 characters including the check digit
cannot be read.)