User Manual

【Enter Setup】
**【Exit Setup】 50
Acquire Scanned Data
After scanning and decoding a barcode, the scanner sends the following input report:
Bit
Byte
7
6
5
4
3
2
1
0
0
Report ID = 0x02
1
Length of the barcode
2-57
Decoded data (1-56)
58-60
AIM ID
61-62
Reserved
63
-
-
-
-
-
-
-
Decoded
Data
Continued
Send Data to the Scanner
This output report is used to send data to the device. All programming commands can be used.
Bit
Byte
7
6
5
4
3
2
1
0
0
Report ID = 0x04
1
Length of the output data
2-63
Output data (1-62)
VID/PID
USB uses VID (Vendor ID) and PID (Product ID) to identify and locate a device. The VID is assigned by
USB Implementers Forum. Newland’s vendor ID is 1EAB (Hex). A PID is assigned to each interface.
Product
Interface
PID (Hex)
PID (Dec)
HR3260 Cordless
USB HID-KBW
0C03
3075
USB COM Port Emulation
0C06
3078
USB HID-POS
0C10
3088