User Manual

【Enter Setup】
107 **【Exit Setup】
Check Digit Verification
A check digit is optional for Standard 25 and can be added as the last digit. It is a calculated value used to
verify the integrity of the data.
Disable: The scanner transmits Standard 25 barcodes as is.
Do Not Transmit Check Digit After Verification: The scanner checks the integrity of all Standard 25
barcodes to verify that the data complies with the check digit algorithm. Barcodes passing the check will
be transmitted except the last digit, whereas those failing it will not be transmitted.
Transmit Check Digit After Verification: The scanner checks the integrity of all Standard 25 barcodes
to verify that the data complies with the check digit algorithm. Barcodes passing the check will be
transmitted, whereas those failing it will not be transmitted.
**【Disable】
【Do Not Transmit Check Digit After Verification】
【Transmit Check Digit After Verification】
If the Do Not Transmit Check Digit After Verification option is enabled, Standard 25
barcodes with a length that is less than the configured minimum length after having
the check digit excluded will not be decoded. (For example, when the Do Not
Transmit Check Digit After Verification option is enabled and the minimum length is
set to 4, Standard 25 barcodes with a total length of 4 characters including the check
digit cannot be read.)