User Manual

【Enter Setup】
93 **【Exit Setup】
Check Digit Verification
Check digits are optional for Code 11 and can be added as the last one or two digits, which are calculated
values used to verify the integrity of the data.
If the Disable option is enabled, the scanner transmits Code 11 barcodes as is.
【Disable】
【One Check Digit, MOD11 (Len<=10) 】
【Two Check Digits, MOD11/MOD11(Len>10)】
**【One Check Digit, MOD11】
【One Check Digit, MOD11 (Len<=10) 】
【Two Check Digits, MOD11/MOD9 (Len>10)】
【Two Check Digits, MOD11/MOD11】
**【Do Not Transmit Check Digit】
【Two Check Digits, MOD11/MOD9】
【Transmit Check Digit】
If you select a check digit algorithm and the Do Not Transmit Check Digit option,
Code 11 barcodes with a length that is less than the configured minimum length after
having the check digit(s) excluded will not be decoded. (For example, when the One
Check Digit, MOD11 and Do Not Transmit Check Digit options are enabled and the
minimum length is set to 4, Code 11 barcodes with a total length of 4 characters
including the check digit cannot be read.)