User's Guide

Enter Setup
73
** Exit Setup
Set Scanner Name
You may scan the below barcode to set the name of your scanner. The maximum length is 5 characters (HEX values from 0x20 to
0x7E). The default scanner name is “00000”.
Scanner Name
If setting the scanner name as “0AB00”：
1. Scan the Enter Setup barcode
2. Scan the Scanner Name barcode
3. Scan the numeric barcode “3”“0”“4”“1”“4”“2”from the “Digit Barcodes” section inAppendix
4. Scan the Save barcode from the “Save/Cancel Barcodes” section inAppendix
5. Scan the Exit Setup barcode
Set Date and Time
You may scan the below barcode to set the date and time on your scanner:
** Set Date and Time
Query the Battery Power of Scanner
Afterscanningthebarcodebelow,thebattery power of scanner willbesenttothehostdevice.
Query the Battery Power of Scanner