User's Guide

Enter Setup
** Exit Setup
66
Batch Mode
Batch Mode Options
Off: The scanner attempts to transmit every barcode you scan. When you are out of service range, the scanned data will
be lost.
Automatic Batch Mode: When in service range, the scanner attempts to transmit every barcode you scan. When out of
range, the scanner stores the scanned data in the flash memory. Once you are back to service range, the scanner will
automatically transmit the stored data and then remove it from the flash memory after transmission is done.
Manual Batch Mode: Scanned data will be stored in the flash memory no matter whether you are in service range or not.
You may send the stored data to the host in the following ways: scan the Transmit Stored Data barcode. The scanner will
automatically remove the stored data from the flash memory after transmission is done if the Auto Clear Stored Data after
Transmission feature is urned on.
**Off
Automatic Batch Mode
Manual Batch Mode