User's Guide

** Exit Setup
31
Enter Setup
Decode Area
WholeAreaDecoding:Thescannerattemptstodecodebarcode(s)withinitsfieldofview,fromthecentertotheperiphery, and
transmits the barcode that has been firstdecoded.
Specific Area Decoding: The scanner attempts to read barcode(s) within a specified decoding area and transmits the
barcode that has been first decoded. This option allows the scanner to narrow its field of view to make sure it reads only
those barcodes intended by the user. For instance, if multiple barcodes are placed closely together, specific area decoding
in conjunction with appropriate pre-defined decoding area will insure that only the desired barcode is read.
** Whole Area Decoding
Specific Area Decoding
If Specific Area Decoding is enabled, the scanner only reads barcodes that intersect the predefined decoding area. The
default decoding area is an area of 40% top, 60% bottom, 40% left and 60% right of the scanner’s field of view
You can define the decoding area using the Top of Decoding Area, Bottom of Decoding Area, Left of Decoding Area
and Right of Decoding Area barcodes as well as numeric barcode(s) that represent(s) a desired percentage (0-100). The
value of Bottom must be greater than that of Top; the value of Right must be greater than that of Left.
Top of Decoding Area
Bottom of Decoding Area
Left of Decoding Area
Right of Decoding Area