User's Guide

** Exit Setup
27
Enter Setup
Sensitivity
Sensitivity specifies the degree of acuteness of the scanner’s response to changes in images captured.
The higher the
sensitivity,thelowerrequirementinimagechangetotriggerthescanner.Youcanselectanappropriatedegreeofsensitivity that
fits the application environment. The feature is only applicable to the Sensemode. It is programmable from1 to 20.The
default setting is Medium (5).
Low Sensitivity
** Medium Sensitivity
High Sensitivity
Enhanced Sensitivity
Custom Sensitivity (1-20)
Set the sensitivity to Level 10:
1. Scan the Enter Setup barcode.
2. Scan the Custom Sensitivitybarcode.
3. Scan the numeric barcodes “1” and “0” from the “Digit Barcodes” section inAppendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section inAppendix.
5. Scan the Exit Setup barcode.