User's Guide

** Exit Setup
19
Enter Setup
Scan Mode
 Level Mode: A trigger pull activates a decode session. The decode session continues until a barcode is decoded or
you release thetrigger.
 Trigger Mode: A trigger pull activates a decode session. The decode session continues until a barcode is decoded,
eitheryou release thetrigger or decodesession timeout.
 Sense Mode: The scanner waits for the image stabilization timeout to expire before activating a decode session
everytime it detects a change in ambient illumination. Decode session continues until a barcode is decoded or the
decode session timeout expires. In this mode, a trigger pull can also activate a decode session. The decode session
continues until a barcode is decoded or the trigger is released. When the session ends, the scanner continues to
monitor ambient illumination.Timeout between Decodes (Same Barcode) can avoid undesired rereading of same
barcode in a given period of time. Sensitivity can change the Sense Mode’s sensibility to changes in ambient
illumination.
 Continuous Mode: The scanner automatically starts one decode session after another. To suspend/resume barcode
reading, simply press the trigger. Timeout between Decodes (Same Barcode) can avoid undesired rereading of
same barcode in a given period of time.
 Pulse Mode: When the trigger is pulled and released, scanning is activated until a barcode is decoded or the decode
session timeout expires (The decode session timeout begins when the trigger is released).
 Batch Mode: When the trigger is pulled and released, scanning is activated until the trigger is released. During pulling
the trigger, good read barcodes will beep and output barcode information. As long as unrelease the trigger, it will
continues decoding. During pulling the trigger, same code can be read only once.
** Level Mode
TriggerMode
SenseMode