User's Guide

Enter Setup
175
** Exit Setup
Set Length Range for Aztec Code
The scanner can be configured to only decode Aztec barcodes with lengths that fall between (inclusive) the minimum and
maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Set the Minimum Length (Default: 1)
Set the Maximum Length (Default: 3832)
Minimumlengthisnotallowedtobegreaterthanmaximumlength.IfyouonlywanttoreadAztecbarcodes with a
specific length, set both minimum and maximum lengths to be that desiredlength.
Set the scanner to decode Aztec barcodes containing between 8 and 12 characters:
1. Scan the Enter Setupbarcode.
2. Scan the Set the Minimum Lengthbarcode.
3. Scan the numeric barcode “8” from the “Digit Barcodes” section inAppendix.
4. Scan the Save barcode from the “Save/Cancel Barcodes” section inAppendix.
5. Scan the Set the Maximum Lengthbarcode.
6. Scan the numeric barcodes “1” and “2” from the “Digit Barcodes” section inAppendix.
7. Scan the Save barcode from the “Save/Cancel Barcodes” section inAppendix.
8. Scan the Exit Setupbarcode.