User's Guide

Enter Setup
123
** Exit Setup
Check Character Verification
Check characters are optional for Code 93 and can be added as the last two characters, which are calculated values used
to verify the integrity of the data.
Disable: The scanner transmits Code 93 barcodes as is.
Do Not Transmit Check Character After Verification: The scanner checks the integrity of all Code 93 barcodes to verify
that the data complies with the check character algorithm. Barcodes passing the checks will be transmitted except the last
two digits, whereas those failing them will not be transmitted.
Transmit Check Character After Verification: The scanner checks the integrity of all Code 93 barcodes to verify that the
data complies with the check character algorithm. Barcodes passing the checks will be transmitted, whereas those failing
them will not be transmitted.
Disable
** Do Not Transmit Check Character After Verification
Transmit Check Character After Verification
If the Do Not Transmit Check Character After Verification option is enabled, Code 93 barcodes with a
lengththatislessthantheconfiguredminimumlengthafterhavingthetwocheckcharactersexcludedwill not be
decoded. (For example, when the Do Not Transmit Check Character After Verification option is
enabledandtheminimumlengthissetto4,Code93barcodeswithatotallengthof4charactersincluding the two
check characters cannot beread.)