User's Guide

Enter Setup
** Exit Setup
106
Check Character Verification
A check character is optional for Interleaved 2 of 5 and can be added as the last character. It is a calculated value used to
verify the integrity of the data.
Disable: The scanner transmits Interleaved 2 of 5 barcodes as is.
DoNotTransmitCheckCharacterAfterVerification:Thescannercheckstheintegrityofall Interleaved2of5barcodes to verify
that the data complies with the check character algorithm. Barcodes passing the check will be transmitted except the last
digit, whereas those failing it will not betransmitted.
TransmitCheckCharacterAfterVerification:ThescannercheckstheintegrityofallInterleaved2of5barcodestoverify that the
data complies with the check character algorithm. Barcodes passing the check will be transmitted, whereas those failing it
will not betransmitted.
Since Interleaved 2 of 5 must always have an even number of digits, a zero may need to be added as the first digit when
the check character is added. The check character is automatically generated when making Interleaved 2 of 5 barcodes.
**Disable
Do Not Transmit Check Character After Verification
Transmit Check Character After Verification
IftheDoNotTransmitCheckCharacterAfterVerificationoptionisenabled,Interleaved2of5barcodes with a
length that is less than the configured minimum length after having the check character excluded
willnotbedecoded.(Forexample,whentheDoNotTransmitCheckCharacterAfterVerificationoption
isenabledandtheminimumlengthissetto4,Interleaved2of5barcodeswithatotallengthof4characters including
the check character cannot beread.)