User's Guide

Enter Setup

** Exit Setup

EAN-13 Beginning with 434/439 Add-On Code Required

This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with a “434”

or “439”. The following settings can be programmed:

Require Add-On Code: All EAN-13 barcodes that begin with a “434” or “439” must have a 2-digit or 5-digit add-on code.

TheEAN-13barcodewiththeadd-oncodeisthentransmitted.Iftherequiredadd-oncodeisnotfound,theEAN-13barcode is

discarded.

Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan

DoNotRequireAdd-OnCode.EAN-13barcodesarehandled,dependingonyourselectionforthe“Add-OnCodeRequired” feature.

** Do Not Require Add-On Code

Require Add-OnCode