User's Guide

Enter Setup
** Exit Setup
88
EAN-13 Beginning with 290 Add-On Code Required
This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with “290”.
The following settings can be programmed:
RequireAdd-OnCode:AllEAN-13barcodesthatbeginwith“290”musthavea2-digitor5-digitadd-oncode.TheEAN-13
barcodewiththeadd-oncodeisthentransmitted.Iftherequiredadd-oncodeisnotfound,theEAN-13barcodeisdiscarded.
Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan
DoNotRequireAdd-OnCode.EAN-13barcodesarehandled,dependingonyourselectionforthe“Add-OnCodeRequired” feature.
** Do Not Require Add-On Code
Require Add-On Code
EAN-13 Beginning with 378/379 Add-On Code Required
This setting programs the scanner to require an add-on code (2-digit or 5-digit) on EAN-13 barcodes that begin with a “378”
or “379”. The following settings can be programmed:
Require Add-On Code: All EAN-13 barcodes that begin with a “378” or “379” must have a 2-digit or 5-digit add-on code.
TheEAN-13barcodewiththeadd-oncodeisthentransmitted.Iftherequiredadd-oncodeisnotfound,theEAN-13barcode is
discarded.
Do Not Require Add-On Code: If you have selected Require Add-On Code, and you want to disable this feature, scan
DoNotRequireAdd-OnCode.EAN-13barcodesarehandled,dependingonyourselectionforthe“Add-OnCodeRequired” feature.
** Do Not Require Add-On Code
Require Add-On Code