User's Manual

LED Notifications

Charging/Battery LED

Red LED on Charging in progress.

Green LED on Fully charged.

Red and green LEDs flash alternately Battery not found.

Red LED flashes Low battery alert.

If the scanner is on and it is not connected to PC via USB cable, pressing the Scan/Power

button and Delete/Reset button at the same time can display the battery level with the

Charging/Battery LED.

Green LED on Battery level is high.

Red and green LEDs on Battery level is medium.

Red LED on Battery level is low.

When the battery voltage is too low, the scanner will beep with flashing red Charging/Battery LED. Please

charge it immediately before the scanner shuts down mandatorily. When it shuts down, please charge it

fully before turning it back on.

Good Read LED

Green LED flashes Good read.

Data LED

Red LED flashes Data being stored in FLASH.

Red LED on FLASH memory depleted.

Function LED

Blue LED flashes slowly with longer off

state

Bluetooth turned on, but no Bluetooth connection

established and the BS80 not found.

Blue LED flashes slowly with longer on

state

Bluetooth turned on, but no Bluetooth connection

established and the BS80 found.

Blue LED on Bluetooth connection established.

Blue LED flashes quickly Data transmission via Bluetooth in progress.

Red LED on USB mode enabled.

Red LED flashes quickly Batch data transmission via USB in progress.