User's Manual

Functions of the Buttons

Scan/Power Button

*Press the button to scan barcode when the scanner is on.

*Hold down the button for 3 seconds to power it on when the scanner is off.

Delete/Reset Button

*Press the button to remove the corresponding data from the FLASH memory in the USB

mode before scanning the barcode to be deleted.

*Hold down the button for 7 seconds to reset it when the scanner is on.

Function Button

*Press the button to turn on the HID keyboard of the connected iOS device in the Wireless

mode.

*Hold down the button for 5 seconds to unpair paired Bluetooth device from the scanner in the

Wireless mode.

*Hold down the button for 3 seconds to start data transmission via USB in the USB mode

(Make sure that the scanner is connected to PC first.)

Scan/Power Button + Function Button

*Hold down the two buttons at the same time for 3 seconds to toggle between the Wireless

mode and USB mode when the scanner is on.

Delete/Reset Button + Function Button

*Hold down the two buttons at the same time for 7 seconds to upgrade the firmware via USB

after clicking the “Start” button of the firmware upgrade utility on PC that the scanner is

connected to.

Scan/Power Button + Delete/Reset Button

*Press the two buttons at the same time to check the battery level with the Charging/Battery

LED when the scanner is on.