User's Manual

DIAGRAM
DIAGRAM 6 7 BASIC OPERATION
BASIC OPERATION
Power switch
●
●
Press“Power switch”more than 2 seconds, the power is on. Operate again,
the power is off.
Transmitting
1 Press and hold “PTT” key, then speak into the microphone in normal
speaking tone. Please keep the microphone 2.5cm away from your lips
to make sure good communication with the receiver.
2 Press “PTT ”in the headset, then speak normally to make sure good
communication with the receiver.
3 Release“PTT”key to receive signals
.
Channel up(+) /down(-) key
●
Press key “CH+” or “CH-” to choose your desired channel, and there will
be voice prompt of the current channel number.
●
press key “CH+”or“CH-”more than 2s to scan upwardly or downwardly.
Channel+
Microphone
Receiving/Transmitting
indicator light
PTT key
Speaker
Headset jack
Channel-
Volume-
Volume+
Power switch
Charging jack
Volume "+" "-"
●
Press key "+" or "-", the volume is turned up or down, and there will be voice
prompt of the current channel number.
Indicator
●
Transmitting: Red LED Light
● Standby：Green LED Light glitters every 5 seconds.
● Receiving：Green LED Light