User's Manual

LC D DIS PLAY
LC D IC ON EX PLA NA T ION
This symbol will appear when transmitting, it means
transmi
t
ting C T C S S code.
This symbol will appear
when transmitting , it means transmitting DC S c ode.
BA S IC OPERA T ION
PTT Key
Transmitting/R eceiving switch key: Press "PT T " to transmit and speak to microphone.
R elease "PTT " to receive.
C A LL K ey (FM/A larm)
Press it for a short time to turn on F M radio function.Operate it again to turn it off.
Press it for a long time to turn on A larm func tion.Operate it again to turn it off.
MON Key (J acklig ht/Monitor)
Press it for a short time to turn on J acklight. Operate it again to turn it off.
Press it for a long time to turn on Monitor function.
Press J acklight/Monitor key and turn the power on, to enter channel clone condition, it can copy one
radio's c hannel parameters to another one.
C loning cable must be used to connect these two radios.
Band K ey
UHF /V HF frequency band shift;
FM radio 65-75 /76-108MHz shift;
In transmitting mode, press Band key to send 1750Hz call tone.
LC D Display
Display all the working condition.
In frequency mode, this symbol will appear, it means transmitting frequency equals
receiving frequenc y plus the offset frequency. It c an set different frequencies.
In frequency mode, it will appear this symbol, it means transmitting frequenc y equals
receiving frequenc y minus the offset frequency. It can set different frequencies.
It means the transmitting and rec eiving frequencies are different at current channel.
It means it already set dual watch operation function.
V OX function
R everse function
It represents the remaining battery. when the battery is almost used up,the frame
starts to flicker and it forbids to transmit.
It means the keypad is locked, pressing key #/Lock c an unloc k the keypad.
Low output power.
C urrent frequency and current menu setting .
S ignal streng th.
C hannel number display
Frequency ending display
09
10