User's Manual
J acklig ht
This function is suitable for night lig hting and warning lig ht.
Tap key MON to turn on night lighting .Operate it again to turn on warning light.
Operate it again to turn it off.
Monitor（MON）
In the same frequency mode, it can monitor signal from the others.
Press MON key for more than 2s to turn it on. Release MON key to turn it off.
C hannel/Frequency Mode C onversion（V F0/MR ）
Tap V FO/MR key to switc h between channel and frequency mode.
TX 1750Hz C all T one
Press key PTT +BA ND to send 1750Hz call tone (This function is for the repeater of European market) .
FUNC TION OPERA T ION A ND DES C R IPT ION（T he following description is without
voice prompt.）
C able C lone（C OPING）
This function can copy one radio’s information to another one.
1. C onnec t with the main-radio and sub-radio by cloning cable.
2. Press and hold MON to turn the radio on, the LC D displays: C OPING. T he red lig ht of main-radio
glitter and the g reen lig ht of sub-radio glitter
3. When the red and g reen lig ht do not glitter, the LC D of sub-radio displays:
or r it means it suc c essed in c loning .
T he op eration s tep s are as f ollows ：
FUNC TION OPERA T ION A ND DES C R IPT ION（T he following description is without
voice prompt.）
R everse F unction（ R ）
When you set different frequencies, tapping“ *” key can shift the transmitting and receiving
frequency, the LC D displays:
1. As above picture the rec eiving frequency of c hannel A is 420.875MHz, the transmitting frequency
frequency is 425.875MHz.
2. Tap“ *” key, the rec eiving frequency is changed to 42 5 .87 5 MHz, the transmitting frequency
is changed to 400.87 5 MHz, the LC D displays:
T he op eration s tep s are as f ollows :
This function can sc an the frequency activity from other radios.
T he op eration s tep s are as f ollows :
!
NOTE
T his function is invalid in the same frequency.
ʎ
Frequency S canning
1. In frequency mode, press key“ *” for more than 2s, it will frequency scan according
to setted step frequency.
2. Press key ▲ or ▼ to change the direc tion of sc anning .
3. Press any key to c onfirm after sc anning the signal.
!
NOTE
S canning mode see Menu No.18
ʎ
45UV
WELCOME
400.875
136.225
R
425.875
136.225
R
47 48