User's Manual
!
NOTE
Pls c heck the channel you store
has the original c hannel or not,
if does, you need to delete it
before channel storing . (C hannel
delete see Menu No.28)
ʎ
a. In frequency mode, input number 4, 6, 5, 8, 7, 5.
b. Press Menu+11 , the LC D displays:
c. Press key Menu, and then press key ▲ or ▼ to adjust to 71 .9 Hz, the LC D displays:
d. A fter setting , press key Menu to confirm, and then press key PTT or E xit to standby.The LC D
displays:
e. Press key Menu+ 13, the LC D displays:
f. Press key Menu, and then press key ▲ or ▼ to adjust to 71.9 Hz，the LC D displays:
g. A fter setting, press key Menu to confirm, and then press key PT T or Exit to standby. T he
LC D displays:
h. Press Menu+27. the LC D displays:
i. Press key Menu, and then press ▲ 001 channel or input number 0, 0, 1 directly, the LC D displays:
j. After setting , press key Menu to confirm, and then press key PT T or Exit to standby.
k. Press key VFO/MR to channel mode, display modes see Menu No.21 and Menu No.22.
First, storing channel 1：
a. In frequency mode, input number 4, 6, 5, 5, 7, 5.
b. Press Menu+13 , the LC D displays:
c. Press key Menu, and then press key ▲ or ▼ to adjust to 88 .5 Hz，the LC D displays:
d. A fter setting , press key Menu to confirm, and then press key PTT or E xit to standby.After transmitting, the
LC D displays:
e. Press Menu+25, the LC D displays:
f. Press key Menu, and then press key ▲ or ▼ to c hoose, the LC D displays:
g. A fter setting, press key Menu to confirm, and then press key PT T or Exit to standby. T he
LC D displays:
h. Press Menu+26, the LC D displays:
i. Press key Menu, then input number: 0, 5, 0 , 0, 0
j. Press Menu+27 , the LC D displays:
k. Press key Menu, and then press key ▲ or ▼ to c hoose No.2 c hannel
or input number 0,0, 2 directly. T he L C D displays:
L. A fter setting , press key Menu to confirm, and then press key PT T or E xit to standby.
M. Press key V FO/MR to channel mode, the LC D displays: Display modes see Menu No.21 and Menu No.22.
S econdly,storing channel 2:(Transmitting frequency is 5MHz lower than receiving frequency.）
FUNC TION OPERA T ION A ND DES C R IPT ION（T he following description is without
voice prompt.）
C hannel Delete（DEL-C H）——Menu No.28
1. In frequency or channel mode, the LC D displays:
2. Press key Menu,and then press key ▲ or ▼ to adjust channel 002 or input number 0,0, 2 directly.
The LC D displays:
3. After setting, press key Menu to confirm, and then press key PT T or Exit to standby.
This function is used to delete channels and information of the radio.
E xamp le: D elete c hannel 2
!
NOTE
Please correctly c hoose the channel you want to delete in case to restorage and unc essary trouble.
W ith display C H-*** means there is storag e channel, and then can be deleted.
ʎ
S tandby Backlig ht（WT-LED）——Menu No.29
1. In frequency or channel mode, press Menu+29, the LC D displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LC D displays:
There are four options: OFF
Y EL LOW
GR EEN
R ED
3. After setting, press key Menu to confirm, and then press key PT T or Exit to standby.
Y ou c an choose the color of backlight when the radio is standby.
T he op eration s tep s are as f ollows ：
11
R-CTCS
OFF
11
R-CTCS
71.9Hz
465.875
136.225
CT
13
T-CTCS
OFF
13
T-CTCS
71.9Hz
465.875
136.225
CT
MEM-CH
000
27
MEM-CH
001
27
13
T-CTCS
OFF
13
T-CTCS
88.5Hz
465.875
136.225
CT
SFT-D
OFF
25
25
SFT-D
-
OFFSET
00.000
26
MEM-CH
000
27
MEM-CH
002
27
465.575
136.225
-
DEL-CH
000
28
DEL-CH
002
28
WT-LED
OFF
29
29
WT-LED
RED
37
38