User's Manual

ʎ
FUNC TION OPERA T ION A ND DES C R IPT ION（T he following description is without
voice prompt.）
A uto K eypad Lock（A UT OLK）——Menu No.24
1. In frequency or channel mode, press Menu+24, the LC D displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LC D displays:
ON：ON OFF: OFF
3. After setting, press key Menu to confirm, and then press key PT T or Exit to standby.
If you set on, the LC D displays:
When power on, but the radio is not in the working mode, the keypad will be automatic ally
loc ked after 1 5 s.
T he op eration s tep s are as f ollows :
!
NOTE
You should set dif ferent
frequenc y deviation
acc ording to the repeaters
selec ted.T his function is
invalid in channel mode.
ʎ
Frequency Offset Direction S etting（S FT-D）——Menu No.25
1. In frequency mode, press Menu+25, the LC D displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LC D displays:
The frequency deviation mode：
a. Transmitting frequency higher than rec eiving frequency（+）；
b. Transmitting frequenc y lower than rec eiving frequency（-）；
c. OFF
3. After setting, press key Menu to confirm, and then press key PT T or
Exit to standby.
When you set the frequency deviation (+), the LC D displays:
When you set the frequency deviation (-), the LC D displays:
Using this func tion, you may set different rec eiving and transmitting frequencies. In general, it’ s
used for repeater.
T he op eration s tep s are as f ollows :
FUNC TION OPERA T ION A ND DES C R IPT ION（T he following description is without
voice prompt.）
Frequency Deviation（OFFS E T ）——Menu No.26
1. In frequency mode, press Menu+26, the LC D displays:
2. Press key Menu, and then input your desired deviation frequency.
If you want to input the frequency deviation 5 MHz, pls input numbers 0、5、0、0 、0 directly.
3. After setting, press key Menu to confirm, and then press key PT T or Exit to standby.
Using this func tion, you c an set the deviation between rec eiving and transmitting frequency.
In general, this function is used for repeater. T he frequenc y deviation of this radio is：0-69.99 0MHz.
T he op eration s tep s are as f ollows :
!
NOTE
S etting the frequency of fset direc tion. (S ee Menu No.25)
ʎ
C hannel S tore （ME M-C H）——Menu No.27
1. In frequency mode, press Menu+27, the LC D displays:
2. Press key Menu, and then press key ▲ or ▼ to choose c hannel number, or you can input your
desired channel number direc tly.Fox example, if you want to input No. 25 c hannel, pls input number
0、2、5 direc tly.
3. After setting, press key Menu to confirm, and then press key PT T or Exit to standby.
Example：C hannel 1（S ame frequency） R eceiving frequency: 465.875 MHz C T C S S : 71.9 Hz
T ransmitting frequency: 465.875 MHz C T C S S : 71.9 Hz
C hannel 2（different frequency）R eceiving frequenc y: 465.575 MHz
T ransmitting frequency: 460.575 MHz C T C S S : 88.5 Hz
When the radio is in frequency working mode or standby mode, input the desired frequency or
parameters directly.
T he op eration s tep s are as f ollows :
AUTOLK
OFF
24
AUTOLK
ON
24
400.875
136.225
SFT-D
OFF
25
25
SFT-D
+
400.875
136.225
+
400.875
136.225
-
OFFSET
00.000
26
MEM-CH
000
27
35 36