User's Manual

FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION
FUNC TION OPERA T ION A ND DES C R IPT ION（T he following description is without
voice prompt.）
PTT ID Prolong T ime（PT T -LT ）——Menu No.20
1. In frequency or channel mode，press Menu+20, the L C D displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LC D displays:
(There are 0-30ms to choose)
3. After setting, press key Menu to confirm, and then press key PT T or Exit to standby.
This function is to set the prolong time of sending the radio’ s PT T-ID.
T he op eration s tep s are as f ollows :
!
NOTE
S elec t“ 0” in normal use to avoid affec ting the radio.
ʎ
!
NOTE
C hannel name must be set
by program software. It c an
edit any three numbers or
characters.
ʎ
A C hannel Display Mode（MDF-A ）——Menu No.21
1. In standby mode press Menu+21, the LC D displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LC D displays:
Display modes：① F REQ：Frequency + C hannel No.
② C H: C hannel No.
③ NA ME：C hannel Name
3. After setting, press key Menu to confirm, and then press key
PTT or Exit to standby.
This function is to set the display mode of channel A .
T he op eration s tep s are as f ollows :
FUNC TION OPERA T ION A ND DES C R IPT ION（T he following description is without
voice prompt.）
B C hannel Display Mode（MDF-B）——Menu No.22
1. In standby mode, press Menu+22, the LC D displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LC D displays:
Display modes： ① F RE Q：F requency + C hannel No.
② C H：C H:
③ NA ME：C hannel Name
3. After setting, press key Menu to confirm,and then press key PTT
or E xit to standby.
This function is to set the display mode of channel B.
T he op eration s tep s are as f ollows :
!
NOTE
C hannel name must be set
by program software. It c an
edit any three numbers or
characters.
ʎ
Busy C hannel Lock（BC L）——Menu No.23
1. In standby mode, press Menu+23, the LC D displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the L C D displays:
ON：ON OFF: OFF
3. After setting, press key Menu to confirm, and then press key PT T or Exit to standby.
When this function is on, it may prevent other radios’ interference. If the selec ted channel or
frequency is being used by other radios, when you press key PT T, the radio you use can not transmit,
It c an transmit only when the station can not receive any signals.
T he op eration s tep s are as f ollows :
PTT-LT
0
20
20
PTT-LT
1
MDF-A
FREQ
21
MDF-A
CH
21
ABC
136.225
4
400.875
136.225
3
4
CH-OO3
136.225
4
MDF-B
FREQ
22
22
MDF-B
CH
400.875
136.225
3
4
400.875
CH-004
3
400.875
ABC
3
BCL
OFF
23
BCL
ON
23
33
34