User's Manual

FUNC TION OPERA T ION A ND DES C R IPT ION（T he following description is without
voice prompt.）
S quelch Level（SQL）——Menu No.0
1. In frequency or channel mode, press Menu+0, the LC D displays:
2. Press key Menu, the LC D displays:
3. Press key ▲ or ▼ to choose squelch level.There are 0-9 levels. 0: Lowest 9 : Highest
4. After setting , press key Menu to confirm, and then press key PT T or Exit to standby.
This function can turn on or off the monitor according to sig nal strength.
T he op eration s tep s are as f ollows :
!
NOTE
Too high squelch level may result in failing to receive in weak sig nals，Too low squelch level will
make it be disturbed by other sig nals.
ʎ
!
NOTE
In channel mode, this function is invalid.
ʎ
S tep Frequency（S T EP）——Menu No.1
1. In frequency mode, press Menu+1, the LC D displays:
2. Press key Menu, the LC D displays:
3. Press key ▲ or ▼ to choose your desired step frequenc y.You can set 2.5/5.0/6.25/10.0/12.5/
25.0K Hz step frequency.
4. After setting , press key Menu to confirm, and then press key PT T or Exit to standby.
This function can choose the step frequenc y you want to set.
T he op eration s tep s are as f ollows :
FUNC TION OPERA T ION A ND DES C R IPT ION（T he following description is without
voice prompt.）
Output Power（TX P）——Menu No.2
1. In frequency or channel mode, press Menu+2, the LC D displays:
2. Press key Menu, the LC D displays:
3. Press key Menu, and then press key ▲ or ▼ to choose.High: 6W，L ow: 1W ，
4. After setting , press key Menu to confirm, and then press key PT T or Exit to standby.
This function can choose High/L ow output power.
T he op eration s tep s are as f ollows :
!
NOTE
S elec ting high output power can improve the call quality, low output pow can reduce radiation and the
battery c apacity loss . In c hannel mode, press fas t key "#" to switch between high and low output power.
ʎ
!
NOTE
If you choose OF F, the radio is not battery saving . In general, we sug gest you choose 1:1.
ʎ
Battery S aving（S A V E）——Menu No.3
1. In frequency or channel mode, press Menu+3, the LC D displays:
2. Press key Menu, and then press key ▲ or ▼ to choose battery saving func tion. T he LC D displays:
There are five kinds of mode. ①OFF ②1 ：1 ③1：2 ④1：3 ⑤1：4 E xample: 1: 1(1s’ working ,1s’
battery saving) 1：2 (1s’ working, 2s’ battery saving )
3. After setting, press key Menu to confirm, and then press key PT T or Exit to standby.
This function is mainly to save battery c apacity when the radio is standby.
T he op eration s tep s are as f ollows :
0
SQL
5
0
SQL
6
1
STEP
25.0K
1
STEP
12.5K
2
TXP
HIGH
2
TXP
LOW
3
SAVE
OFF
3
SAVE
1
23
24