User's Manual

Put the output plug of the adaptor into the charger base, and put the plug of the adaptor into
the eletrical power (as showed in the picture).
03 04
Slide the Li-ion battery pack or radio with a Li-ion battery
pack into the charger.
⊙Make sure the battery pack is in connected with the charging terminals.
⊙When charging begins, the RED LED light displays.
⊙When the battery pack is charged to its greatest capacity, the GREEN LED light displays.
CHARGING NOTES (2)
Attach the antenna to the radio as illustrated on the right.
INSTALLING BELT CLIP
Attach the belt clip with the supplied screws by using a
Phillips screw driver.
INSTALLING ANTENNA
INSTALLING EXTERNAL SPEAKER/MICROPHONE
Insert the speaker/microphone plugs into the speaker/microphone jacks.
⊙NOTE: The radio is not fully water-resistant while using the external
speaker/microphone.