USER'S MANUAL
Conventional functional features Thank you for purchasing this Radio.We believe this radio is new, powerful, stable and easy-to-use.As a result, we know that you will be pleased with the quality and features of this product.
Conventional functional features Thank you for purchasing this Radio.We believe this radio is new, powerful, stable and easy-to-use.As a result, we know that you will be pleased with the quality and features of this product.
PRECAUTIONS BEFORE USING IMPORTANT INSTRUCTIONS Please be sure to comply with the specifications and notes as follows when using battery. Please pay Please read the User’s Manual before using . It gives you important information about how to attention that the battery overheat may cause fire or explosion by misuse. operate the portable radio. Read battery labels and manual before use. Please put the radio and accessories where the children can not touch.
WARNINGS Store or use the battery away from places with electrostatic electricity Must keep battery pack away from children. Guardian should explain instructions to children before they use. Read instructions carefully before charging and discharging batteries. Change the battery when it works shorter time than normal. Take battery out when it is over cycle life Get the battery out of radio if not use it for long time, and keep it in clean, cool, dry, and ventilated place.
! CHARGING NOTES (1) Carefully unpack the portable radio. We suggest that you check the following items before you throw away the packing materials. Battery packs are not charged when they are shipped. Charge them before use. Initially charging the battery pack after purchased or extended storage (longer than 2 months) will not bring the battery pack to its greatest capacity or its normal charge, which can be done only after repeatedly charging and discharging for two or three times.
CHARGING NOTES (2) INSTALLING ANTENNA Put the output plug of the adaptor into the charger base, and put the plug of the adaptor into Attach the antenna to the radio as illustrated on the right. the eletrical power (as showed in the picture). INSTALLING BELT CLIP Slide the Li-ion battery pack or radio with a Li-ion battery Attach the belt clip with the supplied screws by using a pack into the charger. Phillips screw driver.
DIAGRAM ATTACHING THE BATTERY PACK Slide the battery pack into the back of the radio in the direction of the arrow. Slide the battery pack until the battery releasing button makes a“clicking”sound. "OUFOOB 39 59 *OEJDBUPS 4QFBLFS RELEASING THE BATTERY PACK .JDSPQIPOF Turn off the radio before releasing the battery pack. Press the battery releasing button in the direction of arrow as showed below. Then push the battery in the direction of arrow. And then release the battery pack.
BASIC OPERATION DIAGRAM Turn the Power/Volume knob clockwise to turn the power on, the radio will beep and remind you the current channel. (As P-1) Pressing the “Monitor”key, turn the Power/Volume knob at the same time to adjust the volume. (As P-2) Turn the channel knob to choose the channel you want. (As P-3) When you receive signal, the speaker will make a sound. 5SBOTNJU CVUUPO &BS .
BASIC OPERATION Press ▲ or ▼ to select the Call number and press MENU Press ▲ or ▼ to to choose SELECT Channel Select Press MENU to save This radio consists of 1024 channels and is divided into 64 zones, every zone consists of up to You can press EXIT while editing, it will not save any data you change or edit and will be back 16 channels. to the previous menu.
6. Press * key to clear the contents you write. The sub-menu of CONTACTS consists of: 7. Press MENU to save after finishing editing. 1. DISP (description: name/number/type) 2. ADD (adding contact information, note: the upper limit of contact number is 1024, you need to Menu Setting delete some contact information if you want to save more information when it is full) Press MENU to choose the items you want to set in the menu. While setting, 3.
1. LOCAL (check the radio`s serial/group number) Revive 2. PARAMETER (choose the call time, H/L power, slot) Press the sidekey which is set as Radio revive, emit revive code, it is used to revive the radio. 3. ZONE (choose the zone) 【Note】This function is not available in analog channel mode. 4. DATA/TIME (change the date/time/week/data form) 5. TONE (change the reminding voice of profiles/keypad/power/message) Detect 6.
Emergency mode open One button call Press the sidekey which is set as EMERGENCY MODE OPEN, it is used for emergency call. This function can help key1,2,3,4,5 to fulfill the calling function. 【Note】This function is not available in analog channel mode. One button call Press the sidekey to turn on the bit error ratio (BER). Emergency mode close Repeat/Talk around Press the sidekey which is set as EMERGENCY MODE CLOSE to stop emergency call. Press the sidekey to open the REPEAT/TALK AROUND function.
'&6 Ӑ丩ᮦ⸷㺞 DCS CTCSS 01 D023N 15 D114N 29 D174N 43 D315N 57 D464N 71 D632N 02 D025N 16 D115N 30 D205N 44 D331N 58 D465N 72 D654N 03 D026N 17 D116N 31 D223N 45 D343N 59 D466N 73 D662N 04 D031N 18 D125N 32 D226N 46 D346N 60 D503N 74 D664N 05 D032N 19 D131N 33 D243N 47 D351N 61 D506N 75 D703N 241.8 06 D043N 20 D132N 34 D244N 48 D365N 62 D516N 76 D712N 50 250.3 07 D047N 21 D134N 35 D245N 49 D371N 63 D532N 77 D723N 51 254.
SPECIFICATIONS DCS 85 D026I 99 D116I 113 D223I 127 D343I 141 D466I 155 D662I 86 D031I 100 D125I 114 D226I 128 D346I 142 D503I 156 D664I Frequency range 400-470MHz 87 D032I 101 D131I 115 D243I 129 D351I 143 D506I 157 D703I Rated voltage DC7.2V D712I Antenna impedance 50Ω Dimensions 14.0cm(L)x6.1cm(W)x4.
FCC Statements: An appropriate warning lable is affixed to all units.In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip). Do not use this device when antenna shows obvious damages Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
